英文手机底部

COPYRIGHT © Jingji Technology Co., Ltd.

浙ICP备17002961号-1 Powered by 300.cnJiaxing

 

 PRODUCTS

Provide permanent magnet frequency conversion drive system solution

MTC series torque - limited permanent magnetic coupler

basic information
Categories:
Coupler
Release time:
2018-06-15
Details
MTC series torque - limited permanent magnetic coupler
 
Operating principle
Limited moment type permanent magnet coupling is made up of two symmetrical disk structure, can be regulated through a small range of air gap between rotor and permanent magnet rotor conductors to change the size of the output torque, so as to realize the torque of the motor and load. The active end and the driven end are respectively composed of two wheels, with a gap fit to facilitate installation. They are connected to the motor shaft and load shaft by a locking disk, and do not need any key way or pin for fixation.
When the load exceeds the limit value of a certain torque, the magnetic induction force will generate axial repulsion force to widen the air gap, so that the load and the motor are completely separated, so as to protect the motor from damage.
 
Scope of application
Permanent magnet eddy current transmission, high reliability, can be in electric power, coal, chemical, steel, metallurgy, petroleum, shipbuilding and other industries widely used, low failure rate, in the most demanding environment, ensure the continuous and stable operation.
If you are still struggling with traditional hydraulic soft start maintenance, overload protection, pollution and low efficiency, the precision MTC series torque limited permanent magnetic coupler is your best choice.
 
Product features
Entanglement start
Overhaul eliminates vibration and reduces wear and tear
Entanglement requires no lubrication or repair
The solubility is simple, reliable and purely mechanical
The overhaul installation is simple and allows for large alignment errors
Energize is green and energy efficient, saving 5% to 15%
The stallion ADAPTS to all kinds of bad environments
The stallion has a long life
The stallion torque limitation, overload protection
The stallion has a better buffer to start and stop
A device that requires good buffer startup performance.
Equipment with high probability of stop-over such as conveyor, coal grinder, crusher, etc.
It can be used instead of torque - limiting hydraulic coupler
 
Performance comparison
According to the working principle of permanent magnet governor, it can be seen that it has the following characteristics: the total cost is low; Energy saving; Soft start/soft stop; Overload protection; Precise control procedures; Precise shaft calibration is not required; Adaptable to harsh working conditions; Can eliminate vibration greatly; Small size, small footprint; No electromagnetic interference and harmonic current. In addition to the energy conservation has the following advantages, when in more than 80% of the rated speed control, permanent magnet governor the highest overall efficiency, less than 80%, second only to the inverter, but it has a lot of performance is better than that of the inverter.
On a
ETS series permanent magnet governor
The next article
GX series energy-saving permanent magnetic coupler